Nokia N-Gage Extended User Manual page 88

• Send message - Define how e-mail is sent from your
game deck. Immediately - A connection to the mailbox
is started after you have selected Send.
conn. - E-mail is sent when you connect to your
remote mailbox the next time.
• Send copy to self - Select Yes
mail to your remote mailbox and to the address
defined in My mail address.
• Include signature - Select Yes
signature to your e-mail messages and to start to
write or edit a signature text.
• User name: - Write your user name, given to you by
your service provider.
• Password: - Write your password. If you leave this field
blank, you will be prompted for the password when
you try to connect to your remote mailbox.
• Incoming mail server: (Must be
address or host name of the computer that receives
your e-mail.
• Mailbox type: - Defines the e-mail protocol your remote
mailbox service provider recommends. The options are
POP3 and IMAP4.
Note: This setting can be selected only once
and cannot be changed if you have saved or exited
from the mailbox settings.
• Security - Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote
mailbox.
88
• APOP secure login
encrypt the sending of passwords to the remote e-mail
During next server. Not shown if IMAP4 is selected for
• Retrieve attachment
set to POP3) - To retrieve e-mail with or without
to save a copy of the e- attachments.
• Retrieve
you want to retrieve to your game deck. The options are
if you want to attach a All and User
IMAP4 protocol.
Settings for service messages
When you go to
Settings→ Service
opens:
• Service messages
defined) - The IP
receive service messages.
• Authentic. needed
service messages only from authorised sources.
Settings for Cell broadcast
Check with your service provider whether Cell broadcast is
available and what the available topics and related topic
numbers are. Go to Messaging→ Options→ Settings→
Cell broadcast
• Reception
• Language
messages in all supported languages.
- Used with the POP3 protocol to
Mailbox
(not shown if the e-mail protocol is
headers- To limit the number of e-mail headers
defined, which can only be used with the
Messaging and select Options→
message, the following list of settings
- Choose whether or not you want to
- Choose if you want to receive
to change the settings:
- On or Off.,
- All allows you to receive cell broadcast
Selected allows
type:.