Indicators Related To Actions; Data Connection Indicators - Nokia N-Gage Extended User Manual

'Navigation bar - moving horizontally', p. 11 and 'Profiles',
p. 90.
F Shows the current shortcuts assigned for the selection
keys and .
Tip! You can change the selection key shortcuts
and the background image. See the settings for
'Standby mode', p. 8.
Note: Your game deck has a screen saver. If there
are no actions for five minutes, the display is cleared
and a screen saver becomes visible. See p. 39. To
deactivate the screen saver, press any key.

Indicators related to actions

One or more of the following icons may be shown when
the game deck is in standby mode:
- Indicates that you have received new messages to
the Inbox in Messaging. If the indicator is blinking, the
game deck memory is low and you must delete some data.
For further information, see 'Memory low', p.126.
- Indicates that you have received new e-mail
(network service).
- Indicates that you have received one or several
voice messages. See 'Calling your voice mailbox', p. 17.
- Indicates that there are messages waiting to be sent
in Outbox. See p. 67.
- Shown when Incoming call alert has been set to
and Message alert tone to Off in the currently active profile.
See 'Profiles', p. 90.
- Indicates that the game deck's keypad is locked.
- Indicates that you have an active alarm. See 'Clock',
p. 102.
- Indicates that Bluetooth is active. Note that, when
data is transmitted via Bluetooth, is shown.
- Indicates that all calls to the game deck are
diverted. - Indicates that all calls to the game deck
are diverted to a voice mailbox. See 'Settings for call
diverting', p. 20. If you have two phone lines, the divert
indicator for the first line is and for the second line
. See 'Line in use (network service)', p. 40.
- Indicates that you can make calls using phone line 2
only (network service). See 'Line in use (network service)',
p. 40.

Data connection indicators

• When an application is establishing a data connection,
one of the indicators below blinks in standby mode.
• When an indicator is shown continuously, the
connection is active.
for a data call, for a high speed data call,
is shown instead of the antenna symbol when there is
an active GPRS connection. for when the GPRS
connection is put on hold during voice calls.
Silent
9