Multimedia Messages - Nokia N-Gage Extended User Manual

2 Enter recipient
information and add text.
3 Select Options→ Send or
press .
Note: Each picture
message is made up of
several text messages.
Therefore, sending one
picture message may
cost more than sending
one text message.

Multimedia messages

A multimedia message can contain a combination of text
and video clips, or text, images and sound clips, but never
a combination of images and video clips.
Options in the multimedia
message editor: Send, Add recipient, Insert,
message, Remove, Objects, Delete, Message
Sending options, Help, and Exit.
Important: Copyright protections may prevent
some images, ringing tones and other content from
being copied, modified, transferred or forwarded.
Note: This function can be used only if it is
supported by your network operator or service provider.
Only devices that offer compatible multimedia message
or e-mail features can receive and display multimedia
messages. Devices that do not have these features may
receive details of a link to a web page.
Settings needed for multimedia messaging
You may receive the settings as a smart message from
your network operator or service provider. See 'Receiving
smart messages', p. 78.
For availability of and subscription to data services, please
contact your network operator or service provider.
1 Go to Settings→ Connection
define the settings for a multimedia messaging access
point:
Connection name - Give a descriptive name for the
connection.
Session mode - Select a data connection type:
data, High speed GSM, or GPRS.
Gateway IP address - enter the address.
Example: Domain names such as
Preview
www.nokia.com can be translated into IP
details,
addresses like 192.100.124.195.
Homepage - enter the address of the multimedia
messaging centre.
• If you selected GSM data
Dial-up number - a phone number for the data call.
• If you selected GPRS, fill in:
name given to you by your service provider.
For further information on different data connections,
see also 'Connection settings', p. 41.
settings→ Access points and
GSM
or High speed GSM, fill in:
Access point name - the
73