Stitch Width; Func; Arrow Buttons; Clr/Stitch Menus - Husqvarna Platinum 730 User Manual

III1kti,,IS
atiel Iuhol)isIi.Ia v
—
+ Stitch width
The stitch width is set in the same
manner as the stitch length. The set
width is visible on the InfoDisplay
above the stitch width button. The
width can be adjusted between 0 and
6 mm. If straight stitch is selected.
the width button is used to ad just the
needle position.
u FUNC
Touch this button to step between the
different modes on your Platinum 730.
There are three different modes;
NORM.
PROG and
REP.
The
NORM
mode (normal
sewing mode) is always active when
the machine is turned on. Touch once
to activate the program mode (used
when programming), then touch again
to enter the
REP
mode that is used to
sew a programmed combination. Touch
again to return to
NORM
mode. The active
mode is indicated on the lnftDisplay.
+Arrow Buttons
These buttons are used to advance or
return within a programmed sequence.
ciR: CLR
on the Touch Panel and the decorative
stitches are pictured inside the lid. You
can also find an utility stitch overview
on page 58 in your Platinum Family
I landbook.
l'ouch the stitch menu
button to step
between the two menus. The selected
menu is indicated by a number in the
Overview Window.
Touch one of the stitch buttons to select
the stitch. The number for the selected
stitch is shown on the InfoDisplay.
When the stitch is shown as 1:02
in
the
User's Guide/Flandbook, 1 indicates the
stitch menu 1 and 02 the selected stitch.
Likewise, 2:20 is stitch number 20 on
stitch menu 2.
Your Platinum 730 sets the speed, stitch
length and -width. The recommended
presser foot, presser foot pressure,
thread tension and needle are also
shown on the lnfoDisplay. Set your
Platinum 730 according to the recom
mendations.
Touch this hutton in
PROG
to delete
the whole or a part of a program (see
page 25). When a program in a
memory
has been deleted, the stitch number is
cleared on the InfoDisplay.
Stitch Menus
Your Platinum 730 has 21 utility stitches
(menu 1), and 21 decorative stitches
(arienu 2). The utility stitches are visible