Profoto Pro-8a 2400 Air User Manual page 4

CAUTION – Burn Hazard – Hot Parts!
• Do not touch hot parts with bare fi ngers! Mode-
ling lamps, fl ash tubes and certain metal parts
emit strong heat when used!
• Do not point modeling lamps or fl ash tubes too
close to persons. All lamps may on rare occa-
sions explode and throw out hot particles!
NOTICE – Equipment Overheating Risk
• Remove transport cap from lamp head before
use!
FINAL DISPOSAL
• Equipment contains electrical and electronic
components that could be harmful to the envi-
ronment.
• Equipment may be returned to Profoto distri-
butors free of charge for recycling according to
WEEE.
• Make sure that rated voltage for modeling lamp
corresponds with technical data of user guide
regarding power supply!
• Do not obstruct ventilation by placing fi lters, dif-
fusing materials, etc. over inlets and outlets of
the equipment ventilation or directly over glass
cover, modeling lamp or fl ash tube!
• Follow local legal requirements for separate
disposal of waste, for instance WEEE directive
for electrical and electronic equipment on the
European market, when product life has ended!