Operating Instructions; Lamp Head Connection; Power Connection; Settings - Profoto Pro-8a 2400 Air User Manual

Operating instructions

Lamp head connection

1. If only one lamp head is used, connect the lamp to Lamp Head Con-
nector A [4].
2. When connecting the lamp head plug, align the white dot on the plug
with the white dot to the upper left of the Lamp Head Connector.
Secure by turning the ring on the plug clockwise.

Power connection

1. Use the included power cable to connect the generator to the Power
Supply (AC) Connector [11].
2. The Power Supply Indicator [12] will be red, indicating that the ge-
nerator is receiving power but is in standby mode.
3. Press the On switch [13].
4. The Power Sypply Indicator [12] will now be green and the Test But-
ton [10] will be illuminated.

Settings

1. Use the Modeling Light Control [7] to select MAX PROP , MAX ,
PROP or ½ PROP . Press the Modeling Light switch [9] to turn on
the modeling light.
2. Use Flash Light Energy Control A [8] and B [19] to set the energy
levels.
3. Use the Ready Control [16] to select BEEP-DIM , BEEP , DIM or
OFF .
4. Use the Speed Control [18] to select MAX , 75 % , 50 % or 25 % .
P -8 • 25
RO A