26
•
P
-8
RO
A
Sync via cable
1. Connect a sync cord from the camera to one of the Sync Connectors
[2] on the generator.
Sync via cable + fl ash meter
1. Connect a sync cord from the camera to one of the Sync Connectors
[2] on the generator.
2. Connect another sync cable from the fl ash meter to the free Sync
Connector [2].
Sync via Photocell / IR-slave
1. Connect an IR transmitter to the camera.
2. Turn the Sync Control [5] to SLAVE .
Sync via radio (Profoto Air)
1. Connect an Air Remote or Air Sync unit to the camera.
2. Turn the Sync Control [5] to RADIO .
3. Pro-8a is now ready to fl ash, with the selected radio channel.
Wireless remote control
For Air Remote control, both radio channel and group have to be set. The
group can be set individually for each lamp head. For wireless use with
Profoto Studio 2 and AIR USB, only radio channel has to be set.