Turn Off Generator - Profoto Pro-8a 2400 Air User Manual

Changing radio channel and group settings:
1. Turn the Sync Control [5] to SET .
2. The radio channel and group setting for the individual lamp head is
shown separately in Flash Light Energy Display A [8] or B [19] as a
radio channel number (1-8) followed by a group letter (A-F).
3. Turn Flash Light Energy Control A [8] or B [19] clockwise/counter-
clockwise to increase/decrease the radio channel number.
4. Push and turn Flash Light Energy Control A [8] clockwise/counter-
clockwise to increase/decrease the group setting for lamp head A
[4].
5. Push and turn Flash Light Energy Control B [19] clockwise/counter-
clockwise to increase/decrease the group setting for lamp head B
[15].
6. Turn the Sync Control [5] to RADIO .

Turn off generator

1. The modeling light, energy level, radio channel and group settings
are automatically saved as soon as they are changed and will be avai-
lable at start up.
2. Press the On switch [13] to turn off the power.
3. The Power Supply Indicator [12] will be red, indicating that the ge-
nerator is receiving power but is in standby mode.
4. Remove the power cable.
P -8 • 27
RO A