Pair Devices - Nokia E63 User Manual

message is placed in the Inbox folder in the Messaging
application.
Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
A Bluetooth connection is disconnected automatically
after sending or receiving data. Only Nokia PC Suite and
some enhancements such as headsets may maintain a
connection even if not actively used.

Pair devices

Open the paired devices tab.
Before pairing, decide on your own passcode (1-16 digits),
and agree with the user of the other device to use the same
code. Devices that do not have a user interface have a fixed
passcode. You need the passcode only when you connect
the devices for the first time. After pairing, it is possible to
authorise the connection. Pairing and authorising the
connection makes connecting quicker and easier, as you
do not have to accept the connection between paired
devices every time you establish a connection.
The passcode for remote SIM access must have 16 digits.
1. Select Options New paired
>
starts to search for Bluetooth devices within range. If
you have sent data using Bluetooth before, a list of the
previous search results is displayed. To search for more
Bluetooth devices, select
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
device. The device
More devices.
3. Select Yes to make the connection between your
device and the other device automatic, or
confirm the connection manually every time a
connection attempt is made. After pairing, the device
is saved to the paired devices page.
To give a nickname to the paired device, select
Assign short name. The nickname is only displayed in
your device.
To delete a pairing, select the device whose pairing you
want to delete and Options
pairings, select Options
connected to a device and cancel the pairing with that
device, pairing is removed immediately, and the
connection is ended.
To allow a paired device to connect automatically to your
device, select Set as authorised. Connections between
your device and the other device can be made without
your knowledge. No separate acceptance or authorisation
is needed. Use this status for your own devices, such as
your compatible headset or computer, or devices that
belong to someone you trust. If you want to accept
connection requests from the other device separately
every time, select Set as
To use a Bluetooth audio enhancement such as a
Bluetooth handsfree or headset, you need to pair your
device with the enhancement. See the enhancement user
guide for the passcode and further instructions. To
connect to the audio enhancement, switch on the
enhancement. Some audio enhancements connect
automatically to your device. Otherwise open the paired
devices tab, scroll to the enhancement, and select
Options Connect to audio
>
No to
Options
> Delete. To delete all
Delete all. If you are currently
>
unauthorised.
device.
>
93