Wireless Lan Plugins - Nokia E63 User Manual

EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key
•
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.
WPA2 only mode
•
(Advanced Encryption Standard) encryption, select Off.
To allow AES only, select

Wireless LAN plugins

Select Menu Tools
>
Access points.
The EAP (extensible authentication protocol) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
make possible the use of various EAP methods (network
service).
You can view the EAP plug-ins currently installed in your
device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select
New access point
WLAN as a data bearer.
2. Select 802.1x
3. Select WLAN security settings
EAP EAP plug-in
>
116
— If you select WPA/WPA2
— If you select WPA/WPA2
— To allow both TKIP and AES
On
Settings Connection
> >
and define an access point that uses
or WPA/WPA2 as the security mode.
WPA/WPA2
>
settings.
Use EAP plug-ins
>
To use an EAP plug-in when you connect to a WLAN using
the access point, select the desired plug-in and
Pre-
>
Enable. The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-
in, select
To edit the EAP plug-in settings, select
To change the priority of the EAP plug-in settings, select
Options
before other plug-ins when connecting to the network
with the access point, or
use this plug-in for network authentication after
>
attempting to use other plug-ins.
See the device help for more information on EAP plugins.
Session initiation protocol
(SIP) settings
Select Menu
settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of
Options
>
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings for
these sessions. The SIP profile used by default for a
communication session is underlined.
>
To create a SIP profile, select
profile
>
Options > Disable.
Raise priority to attempt to use the plug-in
>
Options
Tools Settings
> >
Options
Use default profile or
Options
>
Options > Edit.
Lower priority to
>
Connection SIP
> >
New SIP
>
Use existing profile.