Insert The Memory Card; Eject The Memory Card; Connect The Headset - Nokia E63 User Manual

2. Connect the charger to the device. If the battery is
completely discharged, it may take a while before the
charging indicator starts scrolling.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
Your battery has been precharged at the factory, but the
charging levels may vary. To reach the full operation time,
charge the battery until it has been fully charged according
to the battery level indicator.
Tip: You can use older style Nokia chargers with
your device by attaching the CA-44 adapter to the
old charger. The adapter is available as a separate
enhancement.

Insert the memory card

Use a memory card to save the memory on your device.
You can also back up information from your device to the
memory card.
The sales package of your device may not include a
memory card. Memory cards are available as separate
accessories.
1. Open the cover of the memory card slot.
2. Insert the memory card in the slot with the contact
area first. Ensure the contact area is facing the
connectors on the device.
3. Push the card in until it locks into place.
4. Close the cover.

Eject the memory card

1. Press the power key briefly, and select
memory card.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from the
memory card slot.
4. Close the cover.

Connect the headset

Warning: When you use the headset, your ability to
hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
Connect the compatible headset to the headset connector
of your device.
Remove
13