Nokia E63 User Manual page 125

To stop the background scans, select
Settings Connection
>
availability > Never. You can still manually scan for
available WLAN networks and connect to WLAN networks
as usual.
To increase the background scan interval, select
WLAN availability > Yes, and define the interval in
for networks.
Q: Why can't I browse the web even though the
WLAN connection is working and the IP settings
are correct?
A: Check that you have defined the HTTP/ HTTPS proxy
settings correctly in the advanced settings of your WLAN
access point.
Q: How do I check the signal quality of my WLAN
connection?
Select Menu Connectivity
>
data connections Options
>
quality is weak or moderate, you may encounter
connection problems. Try again closer to the access point.
Q: Why do I have problems with the security
mode?
A: Check that you have configured the security mode
correctly, and that it is the same that the network uses. To
check the security mode the network uses, select
Connectivity Conn. mgr.
>
connections Options
>
Check also the following: you have the correct WPA mode
(preshared key or EAP), you have disabled all EAP types that
are not needed, and all the EAP type settings are correct
(passwords, user names, certificates).
Menu Tools
>
Wireless LAN Show WLAN
> >
Show
Conn. mgr. Active
> >
> Details. If the signal
Menu
Active data
>
> Details.
Q: Why can't I select a contact for my message?
>
A: The contact card does not have a phone number, an
address, or an e-mail address. Select
Communic. > Contacts, and edit the contact card.
Q: The note Retrieving message is shown
briefly. What is happening?
Scan
A: The device is trying to retrieve a multimedia message
from the multimedia messaging centre. This note is shown
if you have selected
Messaging Options
>
message Multimedia retrieval
>
automatic. Check that the settings for multimedia
messaging are defined correctly and that there are no
mistakes in phone numbers or addresses.
message settings", p. 55.
Q: How can I end the data connection when the
device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To stop the
device from making a data connection, select
Communic. Messaging
>
Multimedia message
Manual to have the multimedia messaging centre save
messages to be retrieved later, or
incoming multimedia messages. If you select Manual, you
>
receive a notification when there is a new multimedia
message that you can retrieve in the multimedia message
centre. If you select Off, the device does not make any
network connections related to multimedia messaging.
To set the device to use a packet data connection only if
you start an application or action that needs it, select
Menu
>
Menu Communic.
> >
Settings Multimedia
> >
Always
>
See "Multimedia
Options Settings
> >
Multimedia retrieval
>
Off to ignore all
Menu
>
>
>
125