Select
WLAN security settings
from the following:
WEP encryption
— Select the desired WEP encryption key
•
length.
WEP key format
— Select whether you want to enter the
•
WEP key data in
ASCII
WEP key
— Enter the WEP key data.
•
802.1x security settings
Select
802.1x
as the WLAN security mode.
802.1x
authenticates and authorises devices to access a
wireless network, and prevents access if the authorisation
process fails.
Select
WLAN security settings
WPA/WPA2
— Select
•
Protocol) or
Pre-shared key
identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key
— If you selected
•
shared
key, enter the shared private key that identifies
your device to the WLAN to which you connect.
WPA security settings
Select
WPA/WPA2
as the WLAN security mode.
Select
WLAN security settings
© 2010 Nokia. All rights reserved.
WEP key settings
>
or
Hexadecimal
format.
and from the following:
EAP
(Extensible Authentication
(a secret key used for device
— If you selected
WPA/WPA2
WPA/WPA2
and from the following:
and
WPA/WPA2
•
Protocol) or
identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key
•
shared
key, enter the shared private key that identifies
your device to the WLAN to which you connect.
WPA2 only mode
•
(Advanced Encryption Standard) encryption, select Off. To
allow AES only, select
Wireless LAN plugins
Select
Menu
Destinations, and an access point group.
The extensible authentication protocol (EAP) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
>
make possible the use of various EAP methods (network
service).
Pre-
>
You can view the EAP plug-ins currently installed in your
device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select
access point
as a data bearer.
2. Select
802.1x
— Select
EAP
(Extensible Authentication
Pre-shared key
(a secret key used for device
— If you select
— If you select
WPA/WPA2
— To allow both TKIP and AES
On
Ctrl. panel
Settings
>
>
and define an access point that uses WLAN
or
WPA/WPA2
as the security mode.
WPA/WPA2
>
Pre-
>
and
Connection
>
Options
New
>
145