Adjustin Digital Speedometer; Check/Set Distance Of Magnetic Sensor - KTM 125SX Owner's Handbook Manual

Hide thumbs Also See for 125SX:
Table of Contents

Advertisement

WHEEL CIRCUMFERENCE „WS"
1. make sure that the indication
"TRP" is active and push the but-
ton on the back approx. 5 seconds
("WS" appears)
3. push the left button until the right figure
is showed in the display
Wheel circumference with standard tires = 2205 mm
1
5 sec
4. repeat nos. 2 + 3 until
km/h:
WS = mm x 3,14
mm x 3,14
mp/h:
WS = (mm x 3,14) : 1,61
Check/set distance of the magnetic sensor
The distance between magnet
malfunctions on the speedometer might occur.
This distance can be corrected by screwing in or off the sensor
2. use the right button to select the position
to be changed
correct wheel circumfe-
rence is indicated
2
and sensor
1 sec
5. push the button on
the back for approx. 1
second to terminate
the setting procedure
2
1
1
must be 2-4 mm, otherwise
1
.
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents