Sony HDC1500 Series Operation Manual page 30

Menu page Item
<DOWN CONVERTER> OUTPUT SIGNAL
<SDI-2 OUT> (HDC1500) OUTPUT
<SDI OUT> (HDC1550/
1400/1450)
To output as VBS
Menu page Item
<POWER SAVE> DOWN CONVERTER
<DOWN CONVERTER> OUTPUT SIGNAL
<TEST OUT> OUTPUT
Constantly outputting a return video
• When a camera control unit is connected, one of the
signals being supplied to the camera control unit can be
output from the camera.
• The last selected return signal is output.
• The same character information as that displayed on the
viewfinder can be added to the output signal by setting
CHARACTER to "ON" on the <SDI-2 OUT>(<SDI
OUT>) or <TEST OUT> page.
To output as HD SDI
Menu page Item
<POWER SAVE> SDI-2 OUT (HDC1500)/
SDI OUT(HDC1550/
1400/1450)
<SDI-2 OUT> (HDC1500) OUTPUT
<SDI OUT> (HDC1550/
1400/1450)
To output as SD SDI
Menu page Item
<POWER SAVE> SDI-2 OUT (HDC1500)/
SDI OUT(HDC1550/
1400/1450)
DOWN CONVERTER
<DOWN CONVERTER> OUTPUT SIGNAL
<SDI-2 OUT> (HDC1500)/ OUTPUT
<SDI OUT> (HDC1550/
1400/1450)
To output as VBS
Menu page Item
<POWER SAVE> DOWN CONVERTER
<DOWN CONVERTER> OUTPUT SIGNAL
<TEST OUT> OUTPUT
Outputting the same image as that on the
Setting
viewfinder
MAIN
• With HD SDI, you can obtain a signal that includes the
SD-SDI
same information as that being displayed on the
viewfinder according to the settings of the VF
MARKER, CHARACTER,VF DETAIL, ZEBRA, etc.
The ON/OFF or other settings for adding information are
common to those for the viewfinder. The output is
Setting
synchronized with switching among Y, R, G, and B or
ACTIVE
switching to a return signal.
• With SD SDI or VBS, the output is synchronized only
MAIN
with switching between a return signal and the camera
VBS
image. It does not correspond to switching among Y, R,
G, and B. Information other than CHARACTER (such as
VF MARKER,VF DETAIL, ZEBRA) cannot be added
to the output.
Note
With the settings for outputting the same image as that on
the viewfinder, the output will be obtained in 1080i, even
if the format setting is 720P.
To output as HD SDI
Menu page
<POWER SAVE>
Setting
ACTIVE
<SDI-2 OUT> (HDC1500)
<SDI OUT> (HDC1550/
1400/1450)
RET
To output as SD SDI
Menu page
<POWER SAVE>
Setting
ACTIVE
<DOWN CONVERTER>
ACTIVE
<SDI-2 OUT> (HDC1500)
RET
<SDI OUT> (HDC1550/
1400/1450)
SD-SDI
To output as VBS
Menu page
<POWER SAVE>
Setting
<DOWN CONVERTER>
ACTIVE
<TEST OUT>
RET
VBS
Outputting via Dual Link (HDC1500 only)
The SDI-1 output is assigned to Link A, SDI-2 output to
Link B.
Item Setting
SDI-2 OUT (HDC1500)/ ACTIVE
SDI OUT(HDC1550/
1400/1450)
OUTPUT VF
Item Setting
SDI-2 OUT (HDC1500)/ ACTIVE
SDI OUT(HDC1550/
1400/1450)
DOWN CONVERTER ACTIVE
OUTPUT SIGNAL VF
OUTPUT SD-SDI
Item Setting
DOWN CONVERTER ACTIVE
OUTPUT SIGNAL VF
OUTPUT VBS
Setting the Camera Outputs
85