Sony HDC1500 Series Operation Manual page 18

European type:
For CE (Europe) and E33 (China and South Asia) models (for PAL areas)
For details on the differences among models, see "Overview" on page 60.
a INTERCOM1 and INTERCOM2 controls and switches
ENG control
PROD control
ENG PROD
MIC MIC
LINE1 PROD LINE2
OFF
ENG
INTERCOM 1
MIC LINE2 switch
MIC LINE1 switch
a INTERCOM1 and INTERCOM2 controls and
switches
The reception level controls are common to intercom 1 and
intercom 2. The talk lines can be set independently for
intercom 1 and intercom 2.
ENG (engineer line) control:
Adjust the intercom audio reception level of the engineer
line.
PROD (producer line) control
Adjust the intercom audio reception level of the producer
line.
PGM1 (program 1) control
Adjust the audio reception level of program 1.
PGM2 (program 2) control
Adjust the audio reception level of program 2.
TRACKER control
Adjust the intercom audio reception level at the
TRACKER connector (page 74) on the connector panel
when using the connector for intercom.
MIC LINE1 (intercom microphone line 1) switch
Select the talk line for intercom 1.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom line
1.
ENG: To talk over the engineer line
PGM1 control
PGM2 control
PGM1 PGM2
LEVEL
TRACKER
REAR
PROD
OFF
ENG
FRONT
INTERCOM 2
LEVEL switch
TRACKER control
b RET 1 button and select switch
c RET 2 button and select switch
RET1 RET2
2 3
1
4
ENG PROD PGM1
MIC MIC
LINE1 PROD LINE2 PROD
OFF OFF
ENG ENG
INTERCOM 1 INTERCOM 2
MIC LINE2 (intercom microphone line 2) switch
Select the talk line for intercom 2.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom line
2.
ENG: To talk over the engineer line
LEVEL switch
REAR: The intercom audio reception level is adjusted
with the controls on this panel.
FRONT: The intercom audio reception level is adjusted
with the INTERCOM LEVEL control on the front of
the camera.
b RET 1 (return video 1) button and select switch
The return video signal selected with the switch is
displayed on the viewfinder screen while the button is
pressed.
c RET 2 (return video 2) button and select switch
When other return video systems are used in addition to
return video 1, you can monitor the signal selected with the
switch on the viewfinder screen while pressing the button.
Note
The RET 1 button has priority over the RET 2 button if
both buttons are pressed.
d LIGHT switch
Set to ON to illuminate the operation panel.
d LIGHT switch
2 3
LIGHT
1
4
ON
OFF
PGM2
LEVEL
TRACKER
REAR
FRONT
Locations and Functions of Parts
73