Saw Chain Filing And File Gauges - Husqvarna 570 EPA II Operator's Manual

Recommended original and replacement bar and chain combinations
Following is a list of recommended cutting equipment for Husqvarna chain saw models 576XP, 576XPG and 570. These
chain saw models equipped with either of the listed bar and sawchain combinations, fulfills the requirements according
to ANSI B 175.1-2000 (Gasoline Powered Chain Saws - Safety Requirements).
Length, inch Pitch, inch
16 3/8
18 3/8
20 3/8
24 3/8
28 3/8
16 3/8
18 3/8
20 3/8
24 3/8
28 3/8
32 3/8
Note: ATM (Armour Tip Medium) is a designation for a hard nose bar with nose radius 1,33".
WARNING! This chain saw is capable of
!
severe kickback that could result in
serious injury to the user. Do not operate
this chain saw unless you have
extraordinary cutting needs and
experience and specialized training for
dealing with kickback. Chain saws with
significantly reduced kickback potential
are available.
Saw chain filing and file gauges
TECHNICAL DATA
Bar
Gauge, inch Max. nose radius
0,058
0,058
0,058
0,058
0,058
0,050 11T
0,050
0,050
0,050
0,050
0,050
Chain
Type Drive link count
60
68
Husqvarna H42,
72
Husqvarna H48
84
92
60
68
Husqvarna H46,
72
Husqvarna H47,
Husqvarna H47S,
84
Husqvarna H82
93
105
English – 39