Samsung SIR-4260V User Manual page 12

Operating Your Camera
BACKLIGHT
Unlike conventional cameras, the SIR-4260V is designed to deliver a distinctive subject and
background at the same time, even when the subject is backlight, by using the features of the
proprietary W-V DSP chip.
1. W hen the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function Setup
switch so that the arrow indicates 'BACKLIGHT'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
2. S elect a desired mode using the Function Setup.
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
BLC ON
HLC (High Light Compensation) :
If the scene contains extremely brightly light areas such as; from car headlights, the light
can mask out much of the on-screen detail. Using Samsung Techwin's HLC feature to
remove exceptionally brightly light areas allows details such as car number plates to
become visible.
- LEVEL : Adjust level of the HLC function.
- LIMIT : Enable to change the operating condition.
- MASK COLOR/TONE : C hange the color / transparency of the masking area.
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced
22
COLOR DOME CAMERA
DC
ATW
OFF
OFF
ON
BLC OFF
User's Manual
HLC MASKING AREA
HLC ON
OFF : Not being used
3. S elect a desired mode using the Function Setup switch and press the Function Setup switch.
Select 'BLC' to adjust the area to be
enhanced then adjust the level.
LOW
Notes
• For effective viewing of license plates, there is a minimum required illumination and the
shutter speed needs to be faster than 1/200sec.
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT
ONLY mode.
• The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
• BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
COLOR DOME CAMERA
HLC OFF
HLC : E nable the user to change the level,
limit, mask color/tone and area.
120
5
172
23
User's Manual