Saw Chain Filing And File Gauges - Husqvarna 362XP Operator's Manual

Recommended original and replacement bar and chain combinations
These Husqvarna chain saw models are in the ANSI category of saws above 3,8 cu. in. and are not required to comply with low
kickback performance requirements. However, for these models we recommend the following cutting equipment.
Length, inch Pitch, inch
15 3/8
16 3/8
18 3/8
20 3/8
24 3/8
28 3/8
Note: For the chains above you are free to choose between 0,050" and 0,058" gauge drive link for the corresponding bar, see the
table below.
0,050"/1,3 mm H46
0,058"/1,5 mm H42
WARNING! This chain saw model is capable
!
of severe kickback that could result in
serious injuries to the user. Do not operate
this saw unless you have extraordinary
cutting needs and experience and
specialized training for dealing with
kickback. Saws with significantly reduced
kickback potential are available. Always use
the safest saw and cutting equipment
applicable to your cutting need.
Saw chain filing and file gauges
38 –
English
TECHNICAL DATA
Bar
Gauge, inch Max. nose radius
1,5 11T
1,5 11T
1,5 11T
1,5 11T
1,5 11T
1,5 11T
H47
H48
Chain
Type Drive link count
Husqvarna H42,
56
Husqvarna H48
Husqvarna H42,
60
Husqvarna H48
Husqvarna H42,
68
Husqvarna H48
Husqvarna H42,
72
Husqvarna H48
Husqvarna H42,
84
Husqvarna H48
Husqvarna H42,
93
Husqvarna H48