Safety - onga Pool Pumps Owner's Manual

Safety

IMPORTANT!
The operator must be provided with this owner's manual. This must be read before
operation and followed during operation.
These instructions are a guide only. Users not familiar with pool equipment should seek
advice from suitably qualified persons with experience in pool equipment installation.
PPP-550-1P
PPP-750-1P
PPP-1100-1P
PPP-1500-1P
The Pantera range of pool pumps have been specifically designed to incorporate
features that will provide reliable and efficient pump operation.
The new technology wet end design integrates a unique moulded endshield cover and
lip seal, protecting the motor from water damage making this range ideal for in-ground
or above ground swimming pools.
Technical Data
Inlet
Outlet
Max. Pump Pressure
Max. Working Pressure
Water Temperature Range
Max Ambient Temperature
IP Rating
Electrical Rating
Optimal pH Range
550W
750W
1100W
1500W
ABS Barrel union to suit 40mm PVC pipe internal
ABS Barrel union to suit 50mm PVC Socket external
ABS Barrel union to suit 40mm PVC pipe internal
ABS Barrel union to suit 50mm PVC Socket external
195 kPa
295 kPa
5 - 45°C
55°C
IP55
240 Volt single phase are supplied as standard with
built in thermal overload protection and are designed to
plug directly into a 10 amp domestic power supply to
local electrical authority specifications.
7.2 - 7.8 (Guide Only)
4
3/4hp
1hp
11/4hp
11/2hp