Northern Telecom 3X8 Owner's Handbook Manual page 86

You can program memory buttons for one-touch dialing of
internal or external telephone numbers.
External
1. Press [Feature]
2. Select the button you want to program. This is not necessary
for the
3. If you want this autodialer to use a particular line or line pool,
select that line or line pool button. On the
you can only select a line pool button .
4. Enter the number.
5. Press or [Hold].
Internal
1. Press
2. Select the button you want to program. This is not necessary
for the
3. Enter the number.
Displays
You will see some of the following displays while programming
an button. See Dialing for displays that may occur while
using an button.
BKSP OK
PO842627 01
Telephone.
Telephone.
Continue to enter digits until the
number is complete. Press
to erase an incorrect
digit. Press
are finished.
The memory allotted to
numbers in your
DR5.1 Owner's Handbook
81
Telephone,
or
or (Hold] when you
system is full.