Northern Telecom 3X8 Owner's Handbook Manual page 83

78 Answering the telephone
Hot in
DR5.1 Owner's Handbook
There is no call ringing at your
telephone. If you have a flashing line
button but your telephone is not
ringing, you must press the line button
to answer the call on that line.
The telephone to which you have
directed a call is not in service or is
otherwise unavailable. The call is
returned to your telephone.
Nobody answered the call you parked.
The call has come back to you.
You have used the Call Queuing
feature without picking up the receiver
and Auto Handsfree has not been
assigned to your telephone. You must
use the receiver or
answer a ringing call.
You are receiving a Priority Call. If you'
are on another call, inform the person
you are speaking to that the call is
about to be put on hold. Press the
flashing line indicator of the Priority
Call or wait till the call connects
automatically (in eight seconds).
The Priority Call goes through when
you hear the next beep.
Your active call is placed on Exclusive
Hold. It will be reconnected
automatically when the priority call
ends unless you transfer the priority
call. If you transfer the priority call you
must press the line button of your
original call to reconnect. (For the
Telephone you must hang up
the receiver to complete the transfer
and then pick up the receiver and
to reconnect.)
press
To reject a Priority Call, use DND
q
) or press
PO842627 01
to