Programmed Release - Northern Telecom 3X8 Owner's Handbook Manual

Programmed Release

The Programmed Release feature performs the function of the
button in a programmed dialing sequence. When the system
encounters a Programmed Release at the end of a programmed
dialing sequence, it hangs up the call after the numbers are
dialed. The Programmed Release symbol
the 24 spaces in a programmed dialing sequence.
Run/Stop
Run/Stop inserts a break point into a sequence of dialed
numbers or characters used for automatic dialing. This may be
necessary when you are connecting to a PBX or similar Host
system.
For example, you may call a company with an automated
attendant that instructs you to dial the internal number you need.
You can program the company number, a Run/Stop, then the
internal number on one External
autodialer once to dial the company number. When you hear the
automated attendant, press the autodialer again to dial the
internal number.
The Run/Stop symbol (S) uses one of the 24 spaces in an
External or Speed Dial sequence.
PO842627 01
Host System Signaling 137
takes up two of
button. Press the
DR5.1 Owner's Handbook