Panasonic SV-SD100V Operating Instructions Manual page 7

Using the FM radio (TUNER mode)
As the cord of the earphones
acts the FM antenna, extend it
as far as possible rather than
leaving it coiled.
R L
2,3
2
Stereo earphones
(Use only the
included headphones)
Insert firmly. (The
longer cord is R)
2
4
1
Press
Setting mode
Off
Other modes
MODE
Presetting FM stations
AUTO PRESET
(20 stations can be stored.)
Press twice during Select "AUTO PRESET"
FM reception
MODE
PRESET MEMORY (MANUAL)
Select
Select the
"MANUAL"
frequency and
for "TUNING
press twice
MODE"
MODE
( → below )
To listen to preset channels
Select the preset channel in step 3 above.
Recording the radio
Playback in VOICE PLAY mode: monaural → page 15
While listening Select "REC. START"
to the station,
Press
press
or
Note • Recorded files are saved with the file name "Fxxxx".
• Noise may be recorded if you adjust the volume while recording.
TUNER mode settings
1. Select the desired item.
Press twice Press
MODE
or
EQ
NORMAL: Normal
S-XBS : Add powerful bass
AUTO PRESET (Above)
PRESET MEMORY (Above)
1
Turn the unit on.
2
Select "TUNER".
3
Select the station.
• Press and hold for more
than 2 seconds for
automatic tuning. When
the button is released the frequency starts scrolling
and stops when a station is found.
• You can preset stations to make tuning simpler.
Select "PRESET" for "TUNING MODE" before step 3
( → below: TUNER mode settings)
4
Adjust the volume. (0-25)
OFF OPR ON
• Noise may be heard
when adjusting the
volume.
Press
or
(20 stations can be stored.)
Select
"PRESET MEMORY"
Press
or
Press
TUNING MODE
MANUAL: You can select the stations
(frequencies) manually.
PRESET: You can select the
preset stations.
• No sound is output when switching between functions in TUNER mode.
The icon is displayed if S-XBS is selected.
13
OFF OPR ON
Press
MODE
Press
or
Press
or
• The tuner automatically presets the stations it can receive into the
channels in order.
Press
• Auto Preset may not function if reception is weak or there is
excessive noise. If an unwanted frequency or noise is occupying a
channel, use PRESET MEMORY (MANUAL).
• When finished, the first station memorized is displayed. "TUNING
MODE" is set to "PRESET".
Press
Press again
to stop
recording.
Recording time
2. Set.
Press Press
or
STEREO/MONO
STEREO: To receive as stereo
MONO : To receive as monaural
(MONO is selected to reduce noise
when reception is weak.)
Press
or
MANUAL
Select the channel
Press
or
Repeat as many times as is required.
• During recording, each time you
press the
→ Remaining time → file name.
Changing
the • When remaining time becomes
display less than 10 minutes, the
remaining time is displayed. The
remaining time,
Example:
TUNING
MODE
BAND STEP
(The tuning band
200 kHz / 100 kHz / 50 kHz
• Converting the steps
14
Press
PRESET
Preset
numbers
Press
: Recording time
MODE
and flash.
3. Confirm.
Press
step)
erases all preset stations.