Motorola V3 Service Manual page 23

Level 1 and 2 Service Manual
6809497A15-A
3. Carefully lift the rear housing away from the phone.
Disassembly tool
Figure 6. Removing the Rear Housing
4. Lower the rear housing onto the phone. Ensure the screw holes are aligned to
the transceiver PCB assembly.
5. Insert the 6 housing screws and tighten to a torque setting of 1.5 inch pounds
or 16 N/cm (Newton/centimeters). Do not over tighten.
6. Replace the SIM, battery, and battery cover as described in the procedures.
January 31, 2006
Disassembly
Rear housing frame
051218o
23