SM-RAZOR-ART1-M Installation Manual
1. Warnings
•
Installation of this product should be done by a qualified professional.
•
Do not begin installation before reviewing and understanding these instructions.
•
E nsure the mounting wall used can safely support 4 times the combined weight of the mount and chosen display.
•
Under no circumstances should this product be mounted to metal studs.
•
The manufacturer does not accept responsibility for incorrect installation.
CAUTION:
2. Tools Required
•
Power Drill
•
1/4" Drill Bit
•
Phillips Head Screw Driver
•
Level
•
1/2" (13mm) Socket Wrench
3. Optional Accessories
•
Dual Stud Mounting Bracket (SM-RAZOR-ART1-BKT-20) - For use when mounting location must be between
two studs 16" to 20" apart.
4. Package Contents
4.1. Mount & Accessories
Wall Arm Assembly (1)
Pg. 2
This wall mount is intended for use only with the maximum weight
of 50 lbs./22.67 kg. Use with heavier than the maximum weight
indicated may result in instability causing possible injury.
•
Stud Finder (optional, recommended for wood stud mounting)
•
Zip Ties (for wire management)
•
5/16" Masonry Drill Bit (concrete mounting only)
•
Hammer (concrete mounting only)
Single Stud Wall
Bracket (1)
TV Plate (1)
© 2013 Strong
®