Unpacking; Package Contents; Functional Description; Assembly - Terratek PSMS10L User Manual

10" sliding mitre saw
Table of Contents

Advertisement

Available languages

Available languages

DO NOT DISASSEMBLE LASER MODULE. The laser is a CLASS II LASER PRODUCT
that can emit laser power up to 1 mw max at 635 nm, which could result in exposure
with the module disassembled. The laser unit complies with FDA21 cfr 1040.10 and
1040.11.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPEC IFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION
LASER RADIATION. DO
NOT STARE INTO BEAM.
Wavelength: 630-670 nm
Max. power output:
1 mW
Complies with
FDA21 CFR 1040.10 and 1040.11
Avoid exposure.
ClassII Laser product
WARNING: Do not attempt to repair or disassemble the laser level. If unqualified persons
attempt to repair this laser product, serious injury may result. Any repair required on
this laser product should be performed by authorized service center personnel.
CAUTION: The use of optical instruments with this product will increase eye hazard.

Unpacking

Carefully remove the product and any accessories from the box. Make sure that all items
listed in the packing list are included. (Fig.2)

Package contents

A) Saw
B) Clamp
C) Wrench
D) Dust bag
E) Supports
F) User manual

Functional Description

WARNING: Disconnect the plug from the power source before making any assembly,
adjustments or changing accessories. Such preventive safety measures reduce the risk
of starting the tool accidentally.

Assembly

WARNING: Disconnect the plug from the power source before making any assembly,
adjustments or changing accessories.
Clamp
To install clamp simply insert it into the provided hole on the fence on the right or left side
depending on the cut you are doing and tighten nut. (Fig.3)

Dust bag

Squeeze metal clamp and place over dust outlet and release clamp. (Fig.4)
ATTENTION
RAYONNEMENT LASER. NE FIXEZ
PAS LE RAYON.
Longueur d'onde: 630-670 nm
Puissance de sortie maximale: <1 mW
Conforme à
FDA21 CFR 1040.10-11.
évitez l'exposition
Laser de catégorie II
AVOID EXPOSURE
laser radiation is emitted
from this aperture.
ÉVITEZ TOUTE EXPOSITION
Un rayonnement laser provient de cette ouverture.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF