General; Location Of Controls; Card Remote Commander; Main Unit - Sony CDX-GT317EE Service Manual

• LOCATION OF CONTROLS

• CDX-GT317EE
Location of controls and basic operations

Main unit

1 2 3 4
OFF
PUSH SELECT
EQ3 SOURCE
SEEK SEEK
PTY MODE
DIM ALBM
DSPL 1
9 q; qa qs qd qfqg

Card remote commander

RM-X151
w;
1
OFF ATT
wa
4
SOURCE SEL MODE
qd
qk
+
ws
–
wd
qf
DSPL SCRL
1 2 3
wf
4 5 6
+
ql
VOL
–
6
• CDX-GT360
Location of controls and basic operations
Main unit
1 2 3 4
OFF
PUSH SELECT
EQ3 SOURCE
SEEK SEEK
BTM MODE
DIM ALBM
DSPL 1
9 q; qa qs qd qfqg
Card remote commander
RM-X151
w;
1
OFF ATT
wa
4
SOURCE SEL MODE
qd
qk
+
ws
–
qj
qf
DSPL SCRL
1 2 3
wd
4 5 6
+
ql
VOL
–
6
SECTION 1
5 6 7 8
AUX
REP SHUF PAUSE
2 3 4 5 6 AF/TA
CDX-GT317EE
qh qj
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B EQ3 (equalizer) button 11
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C Volume control dial/select button 11
To adjust volume (rotate); select setup items
(press and rotate).
D SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /AUX).
E Disc slot
Insert the disc (label side up), playback
starts.
F Display window
G AUX input jack 12
To connect a portable audio device.
H Z (eject) button
To eject the disc.
I PTY (Program Type) button 10
To select PTY in RDS.
J
(front panel release) button 5
5 6 7 8
AUX
REP SHUF PAUSE
2 3 4 5 6 SCRL
CDX-GT360
qh qj
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
D SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /AUX).
E Disc slot
Insert the disc (label side up), playback
starts.
F Display window
G AUX input jack 10
To connect a portable audio device.
H Z (eject) button
To eject the disc.
I BTM button 8
To start the BTM function (press and hold).
J
(front panel release) button 5

GENERAL

K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L Receptor for the card remote
commander
M MODE button 8, 12
To select the radio band (FM/MW/LW);
select the unit* 2
.
N DSPL (display)/DIM (dimmer) button
8, 9
To change display items (press); change the
display brightness (press and hold).
O RESET button (located behind the front
panel) 4
P Number buttons
CD/MD* 1 :
(1)/(2): ALBM –/+*
To skip albums (press); skip albums
continuously (press and hold).
(3): REP 8
(4): SHUF 8
(6): PAUSE* 5
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q AF (Alternative Frequencies)/TA
(Traffic Announcement) button 9
To set AF and TA in RDS.
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L Receptor for the card remote
commander
M MODE button 8, 11
To select the radio band (FM/MW/SW);
select the unit* 2 .
N DSPL (display)/DIM (dimmer) button
8
To change display items (press); change the
display brightness (press and hold).
O RESET button (located behind the front
panel) 4
P Number buttons
CD/MD* 1 :
(1)/(2): ALBM –/+*
To skip albums (press); skip albums
continuously (press and hold).
(3): REP 8
(4): SHUF 8
(6): PAUSE* 5
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q SCRL (scroll) button 8
To scroll the display item.
CDX-GT317EE/GT360
This section is extracted
from instruction manual.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
qk < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
ql VOL (volume) +/– button
To adjust volume.
w; ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wa SEL (select) button
The same as the select button on the unit.
ws M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(ALBM –/+) on the unit.
wd SCRL (scroll) button 8
To scroll the display item.
wf Number buttons
To receive stored stations (press); store
stations (press and hold).
3 * 4
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
*3 When an MP3/WMA is played.
*4 If the changer is connected, the operation is
different, see page 13.
*5 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 15.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
qk < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
ql VOL (volume) +/– button
To adjust volume.
w; ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wa SEL (select) button
The same as the select button on the unit.
ws M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(ALBM –/+) on the unit.
wd Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
3 * 4
*3 When an MP3/WMA is played.
*4 If the changer is connected, the operation is
different, see page 11.
*5 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 13.
7
7
5