Control Heat Settings - GE Profile DPSB650 Technical Service Manual

Control Heat Settings

HIGH
For regular to heavy cottons.
MEDIUM
For synthetics, blends and items labeled permanent press.
LOW
For delicates, synthetics and items labeled Tumble Dry Low.
EXTRA LOW
For lingerie and special-care fabrics.
Cycle Options
(Appearance and
features may vary)
SIGNAL
Alerts you that the cycle is complete. The beeper will continue to sound every two
minutes for the next 6 minutes, until the clothes are removed. The clothes should
be removed when the beeper goes off so wrinkles won't set in.
Press SIGNAL to select low, medium or high volume, or to turn the beeper off.
EXTEND TUMBLE PLUS
Minimizes wrinkles by adding approximately 60 minutes of no-heat tumbling after clothes
are dry. The beeper will sound every 5 minutes to remind you to remove the clothes.
The TIME REMAINING display will show 00.
ANTI-BACTERIAL
(on some models)
This option can only be used with the COTTONS or MIXED LOADS cycles. This option
reduces certain types of bacteria by 99.9%, including: Staphylococcus aureus, Pseudomonas
aeruginosa and Klebsiella pneumoniae*. The anti-bacterial process occurs when high heat
is used during a portion of the drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol P154 Sanitization Performance of Residential Clothes Dryers.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
– 11 –