Table of Contents
Advertisement
5
Using Your Headset with your Bluetooth mobile
Phone
Pairing your Headset to your Bluetooth
mobile Phone
1
Turn on your mobile phone and enable Bluetooth. For
most phones select Settings>Tools>Connections>
Bluetooth>On. See your phones user guide for more
information.
2
Power the headset off by pressing and holding the call
control button for six seconds. The headset indicator light
will be red for four seconds.
3
Press and hold the headset call control button for six
seconds or until the red and blue indicator lights flash
alternately.
NOTE
The headset will stay in pairing mode for two minutes.
Placing, Answering, and Ending Calls with your Headset and Bluetooth mobile Phone
To place a call
To answer a call
To answer a call when already on an active
Microsoft Office Communicator call
To end a call
Redial last number*
Activate voice dialing*
Reject a call
Transfer a call from your mobile phone to
your headset
Transfer a call from your headset to your
mobile phone
* Only available on mobile phones and carriers that support these features.
Plantronics Savi Go WH100/B Optimized for Microsoft Office Communicator 2007 User Guide
4
Use the commands on your phone to locate the headset.
For most phones select Settings>Tools>Connections>
Bluetooth>Search>Savi Go WH100. See your phones user
guide for more information.
5
When prompted for a passkey, enter 0000 (4 zeros). The
headset indicator light will flash blue when paired successfully.
NOTE
visit: www.plantronics.com/easytopair.
Dial number on your mobile phone keypad
Short press call control button.
Short press the call control button to end the Microsoft Office Communicator call, then
press again to answer your mobile phone call
Short press call control button.
Double tap call control button. There will be a high tone on each press. A final tone
indicates the last number has been redialed.
Press and hold call control button for two seconds. First tone on key press start followed by
a second tone which indicates voice dial is activated.
Press and hold call control button until you hear two tones.
Press and hold call control button for two seconds until you hear a long tone.
Press and hold call control button for two seconds until you hear a long tone.
For detailed pairing instructions for popular mobile phones
12
Advertisement
Table of Contents
