Use Your Headset With Lync/Microsoft Office Communicator; Powering Headset On/Off; Placing, Answering, And Ending Calls With Lync/Microsoft Office Communicator - Plantronics Voyager PRO UC v2 User Manual

Use Your Headset with Lync/Microsoft Office Communicator

Powering Headset On/Off

The headset will be ready to use once it has been charged as described in
To power the headset on press and hold the Power On/Off button for two seconds. The headset
indicator light will remain solid blue for two seconds to confirm that the headset is powered on.
Power On/Off Button
NOTE The USB adapter indicator light will remain solid blue when the headset is powered on and
paired to the headset. The blue LED on the USB adapter will turn off if the USB adapter cannot air or
connect to the headset.
To conserve power you may optionally power the headset off by pressing the Power On/Off for
two seconds. The headset indicator light will remain solid red for two seconds to confirm that
the headset is powered off.
NOTE While powered off you will not be able to use the headset.

Placing, Answering, and Ending Calls with Lync/Microsoft Office Communicator

To place a call
To answer a call on the
headset
To answer a call when
already on an active call on
your mobile phone
To end a call on the headset
*Consult Lync/Microsoft Office Communicator Help for more information on how to place a call.
NOTE You can also answer calls directly from Lync/Microsoft Office Communicator by clicking on
the Call Alert that appears on your PC screen. In this case the call will be directed to the default
speakerphone which may not be your headset. Consult Lync/Microsoft Office Communicator Help
for more information.
For your safety, do not use headset at high volumes for extended periods of time. Doing
so can cause hearing loss. Always listen at moderate levels. For more information on headsets
and hearing visit: www.plantronics.com/healthandsafety
Indicator Light
Dial number using Lync/ Microsoft Office Communicator.*
Short press call button on headset.
Short press the call button once to end the mobile phone call then press
again to answer your Lync/Microsoft Office Communicator call.
Short press call button on headset.
Fitting your Headset.
12