Cortelco 2740 Instruction Manual page 20

Memory Settings
Storing a Caller ID into Memory
To store a caller ID number into memory, press CALLS. Then press the UP and
DOWN key to select a Caller ID number to save. Press the Memory Location
key or the Directory key (#) and press YES to save or NO to cancel when the
desired number is displayed.
To Store Caller ID Calls
• Press MENU. The display will read "Phone Setting."
• Press the soft key under ENTER.
• Press Down Arrow repeatedly until "Caller ID Store" appears in the display
and then press the soft key under ENTER.
• Press CHANGE to change the setting for Line 1.
• Press DOWN ARROW to view and change the settings for Lines 2-4.
To Store a Memory Dial Number
• Press MENU. The display will read "Phone Setting."
• Press DOWN ARROW until "Memory Setting" appears in the display.
• Press the soft key under ENTER. The display will read "Select Location."
• Press the Memory button where the number is to be stored. The display
will show the currently stored number or indicate "Empty Location."
• Press the soft key under ENTER to store a new number.
• Dial the desired telephone number, up to 32 digits.
• Press the soft key SAVE.
• The 2740 can store up to five numbers that can be dialed automatically
with the press of a memory button.
To Store a Personal Directory Dial Number
• Press MENU. The display will read "Phone Setting."
• Press DOWN ARROW until "Memory Setting" appears in the display.
• Press the soft key under ENTER. The display will read "Select Location."
• Press #. The display will read "Empty Location" or indicate that the personal
directory is full.
• Press the soft key under ENTER to store a new number.
• To change a number, press DOWN ARROW repeatedly until the desired entry
is displayed then press CHANGE.
• Dial desired telephone number.
• Press the soft key under NEXT. The display will show the currently stored
name or indicate "No Name."
20
(cont'd.)