Samsung SPH-m300 User Manual page 46

•
If you said a name listed in your Contacts that has more than one
number associated with it, the phone displays the different locations
(Home, Work, Mobile, Pager, and Others) and asks you which one
to dial. Say one of the location names and the phone will dial the
number for the location you specified.
Note: In some cases, the phone might ask you to repeat a name or number. Make
sure that the number is a valid 7, 10, or 11 digit North American phone number,
and then say the number again. If the number isn't valid, or if the phone still
doesn't understand the number on the second try, it will not place a call.
Using Name Lookup
Name Lookup lets you retrieve contact information for any person in your Contacts
by saying the full name of the person.
To retrieve information using Name Lookup:
1. Activate voice recognition by pressing and holding
prompt you for a command.)
2. Say Contacts. (The phone will prompt you to say the name.)
3. Say the full name of the person, exactly as it is entered in your Contacts.
(The phone will play the name it recognized through the speaker, and
then open the contact information for that name.)
•
If the phone says, "Did You Say", followed by an incorrect name, say
No. The phone then prompts you with the next name, if there is one. If
there are no more names, the phone will say "Sorry, No Match
Found".
Phone Status Information
The Status option gives you an update on your phone's service, signal strength,
and battery level.
To retrieve your phone's status information:
1. Press and hold
you to say a voice command.)
2. Wait for the beep and say Status. Your phone's current status
information is displayed.
to activate voice recognition. (The phone prompts
. (The phone will
Voice Kit 38