Omron CS1W-CIF31 User Manual page 37

Connecting Online from the CX-Programmer
Changing the Allocated Communications Port
█
The communications port (COM port) being used by the Conversion Cable can be
changed with the following procedure. The actual change procedure depends on the
operating system. This example shows the procedure for Windows 2000.
Note If the new COM port is being used by another driver, that driver must be uninstalled.
1. Double-click OMRON CS1W-CIF3* USB Serial Port (COM
window.
2. Click the Port Settings tab.
36
) in the Device Manager
@