Specifications; Compatible Operating Systems; Compatible Software Applications - Omron CS1W-CIF31 User Manual

Usb-serial conversion cable
Hide thumbs Also See for CS1W-CIF31:
Table of Contents

Advertisement

Specifications

Specifications

Compatible Operating Systems

Windows 98/ME/2000/XP/Vista

Compatible Software Applications

The compatible software applications communicate with the PLC using the CX-Server
or FinsGateway. The following software applications use CX-Server or FinsGateway.
Name
CX-Programmer
CX-Simulator
CX-Protocol
CX-Position
CX-Motion
CX-Process
NS-Designer
PLC Reporter
The following software applications are also compatible.
• DeviceNet Configurator
• NT Support Tool for Windows
• ZEN Support Software Ver. 3.0 or later
• Software applications in CX-One
• Communications Port Limitations with the NT Support Tool
1) Version 4.00 and Earlier Versions
Only communications ports COM1 and COM2 can be used. Always change the
communications port allocation for this device to COM1 or COM2 in the Microsoft
Windows Device Manager (see note 1) and specify that port in the NT Support Tool's
communications settings. Once the communications port is specified correctly in the
Windows Device Manager and the NT Support Tool's communications settings, data
such as screen data can be downloaded to the PT or uploaded from the PT through the
USB-Serial Conversion Cable.
Note: In most personal computers, COM1 is allocated to the RS-232C port and
2) Version 4.60E and Later Versions
Any communications port between COM 1 and COM8 can be used. Check the NT
Support Tool's communications settings and verify that the communications port
allocated to the Conversion Cable is also specified in the NT Support Tool.
10
Communications software
CX-Server (FinsGateway is used for network communications.)
FinsGateway
CX-Server (FinsGateway is used for network communications.)
FinsGateway
CX-Server
FinsGateway or CX-Server
FinsGateway
FinsGateway
communications port COM2 can be allocated to the Conversion Cable. Refer to
Changing the Allocated Communications Port on page 36 for details on changing the
communications port. Furthermore, if there is another driver using the allocated port,
that driver must be uninstalled.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xw2z-200p-v

Table of Contents