Connection Configurations - Omron CS1W-CIF31 User Manual

Specifications

Connection Configurations

The following table shows the connection configurations that can be used to connect an
OMRON PLC (or PT) to a personal computer's USB port.
USB-Serial
Conversion
Cable
CS1W-CIF31
(D-sub version)
Note The USB-Serial Conversion Cables are for connections between a USB port and an
OMRON PLC/PT only. In particular, the CS1W-CIF31 Cable can be used only with
compatible OMRON software applications even though it has a standard D-sub 9-pin
connector on one end.
12
Conversion Required adapters or cables
Cable's serial
connector
D-sub 9-pin •CS1W-CN226/626
male (Programming Device Connecting Cable for a
CS/CJ-series peripheral port and personal
computer)
•XW2Z-200/500S-CV or XW2Z-200/500S-V
(Programming Device Connecting Cable for
an RS-232C port and personal computer)
•CS1W-CN118
(RS-232C to CS/CJ-series peripheral port
Conversion Cable)
•CQM1-CIF02
(Programming Device Connecting Cable for a
C-series peripheral port and personal
computer)
•CS1W-CN114
(C-series peripheral port to CS/CJ-series
peripheral port Conversion Cable)
•CQM1-CIF02
(Programming Device Connecting Cable for a
C-series peripheral port and personal
computer)
•RS-232C 9-pin to 25-pin adapter
•CV500-CIF01
(Programming Device Connecting Cable for a
CV-series peripheral port and PC98-type
personal computer)
•XW2Z-200/500S-CV or XW2Z-200/500S-V
(Programming Device Connecting Cable for
an RS-232C port and personal computer)
ZEN-CIF01
(Personal Computer Connecting Cable)
Compatible
PLC or PT
connector
CS/CJ-series
peripheral
port
+
+
C-series
peripheral
port
CV-series
peripheral
+
port
RS-232C port
(D-sub 9-pin)
Personal
Computer
Connecting
port
Compatible PLCs
and PTs
CS/CJ-series,
CQM1H, and
CPM2C
C200HS,
C200HX/HG/HE,
CQM1, CPM1,
CPM1A, CPM2A,
and SRM1
CVM1/CV-series
PLCs (CPU Unit
or Serial
Communication
Unit/Board
connection) or
PTs
ZEN