Advertisement
Cleaning & Maintenance
CARE FOR YOUR SHAVER
To ensure long lasting performance of your shaver,
clean the head assembly regularly. The easiest and the
most hygienic way to clean the shaver is by rinsing the
shaving head after use with warm water. always keep
the protective headguard on the shaving head when
the shaver is not in use.
AFTER EACH USE
1. Ensure the shaver is turned off.
2. Press the release button to open the shaver head.
3. blow on the foils to remove any loose debris.
4. brush or rinse the accumulated hair from the
main body of the shaver, shaving head and cutter
assembly.
5. leave the head assembly open to let the shaver dry completely.
6. Return the shaving head to its original position and snap in
place.
NOTE:
■ Ensure that the shaver is turned off when cleaning.
■ do not clean the shaving foils with the brush.
■ at regular intervals, put a drop of sewing machine oil onto the
foils and cutters head.
REPLACING THE FOILS & CUTTERS
signs that your foils and cutters need replacing:
■ Irritation: as foils get worn, you may experience skin irritation.
■ Pulling: as the cutters wear, your shave may not feel as close
and you may feel your cutter pulling on your hair.
■ wear: you may notice that the cutters have worn through the foils.
To ensure the continued highest quality performance
from your shaver, we recommend that foils and cutters are
replaced every 6 months.
NOTE: The replacement part for your shaver model
is sPw-480.
To order shaver accessories, contact us at 800-392-6544
in the U.s. or 800-268-0425 in canada or visit us at
www.RemingtonProducts.com
TO REPLACE THE FOIL
1. Ensure the shaver is switched off.
2. Remove the shaver head.
3. Gently push the small plastic tabs area at
either end of the foil carrier. The foil carrier
tabs
should then easily detach from the
shaving head.
4. To reassemble, snap the new foil carrier
into position.
5. attach the shaving head.
CAUTION
■ Only hold the plastic to prevent damage
new foil
to the foil.
■ do not press on the foil when replacing.
TO REPLACE THE CUTTERS
1. Ensure the shaver is switched off and open the shaving head.
2. To remove cutter, grasp cutter between thumb and forefinger
and pull upward.
3. To reassemble cutter, place cutter onto oscillator tip. Gently
push down clicking into position.
ImPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS,
ELECTROCUTION, FIRE,OR INJURY TO PERSONS:
store the product at a temperature between 60°f and 95°f.
Only use the parts supplied with this appliance. Use of non
Remington® parts with this product may give rise to a haz-
ardous condition.
keep this product out of reach of children. The use of this
appliance by persons with reduced physical, sensory or men-
tal capabilities or lack of experience and knowledge can give
cause to hazards. Persons responsible for their safety should
give explicit instructions or supervise the use of the appliance.
Warranty
Limited Two-Year Warranty
spectrum brands, Inc. is a global consumer products company with
®
a diverse portfolio of world-class brands, including Remington
-
branded electric shavers. spectrum brands, Inc. warrants this
product against any defects that are due to faulty material or
workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the
product resulting from accident or misuse.
If the product should become defective within the warranty period,
we will replace it free of charge. Return your product and sales
receipt with your name, address and day time phone number to:
Remington Returns center, 507 stokely dr., P.O. box 1, deforest,
wI 53532. for more information call 800-736-4648 in the U.s. or
800-268-0425 in canada.
warranty excludes:
■ screens and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE
FOR OR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
■ accident, misuse, abuse or alteration of the product
■ servicing by unauthorized persons
■ Use with unauthorized accessories
■ any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the instal-
lation or maintenance of this product.
SPECTRUm BRANDS, INC. SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAmAGES RESULTING FROm THE USE OF THIS PRODUCT.
ALL ImPLIED WARRANTIES, INCLUDING BUT NOT
LImITED TO Im PLIED WARRANTIES OF FITNESS AND
mERCHANTABILITY, ARE LImITED IN DURATION TO TWO
YEAR FROm DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state or province to
province. some states do not allow the exclusion or limitation
of incidental, special or consequential damages.
Performance Guarantee
Performance Guarantee
Spectrum Brands, Inc. money-back Offer
If within 30 days after you have purchased your Remington®
branded product, you are not satisfied and would like a
refund, return it with the sales slip indicating purchase price
and date of purchase to the retailer from whom it was pur-
chased. spectrum brands, Inc. will reimburse all retailers who
accept the product within 30 days from the date of
purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the U.s. or
800-268-0425 in canada.
® Registered Trademark of ROVcal, INc.
Questions or comments: call 800-736-4648 in U.s. or 800-
268-0425 in canada. or visit www.RemingtonProducts.com
dist. by: spectrum brands, Inc.,
Madison, wI 53711
dist. by: spectrum brands canada, Inc.,
Mississauga, ON l5l 0a1
© 2010 ROVcal, INc.
11/10 Job #cs40166_REV
Manufactured to Remington's specifications in the PRc.
T22-30580
Advertisement
