Using The Front Aux Input Terminal; Option Menu Setting - Alpine CDE-W235BT Quick Reference Manual

Using the Front AUX Input Terminal

Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
Press SOURCE, and select the AUXILIARY mode to
listen to the portable device.
Portable player, etc.
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
Notes
• This function is available only when AUX SETUP is set to ON. For
details, refer to "Setting the AUX SETUP Mode" on page 18.
• If a Flash Memory is directly connected to the USB terminal, the size or
shape may interfere with driving operations, therefore, avoid connecting
an AUX input terminal and a Flash Memory at the same time.

Option Menu Setting

You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2
Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
3
Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
 Setting item:
TUNER mode:
*1
VOL LV ADJ
DISC mode:
*2 *1
 VOL LV ADJ
CD SET
USB mode:
*1
VOL LV ADJ
iPod mode:
*3
 IPOD SET
IPOD CONT
Main unit
or
*4 *1
 VOL LV ADJ
AUX mode:
*5 *1
 VOL LV ADJ
AUX SET
BT AUDIO mode:
*6 *1
 VOL LV ADJ
BT SET
Phone mode (Non-calling mode):
*7 *8
 VOL LV ADJ
PHONE SET
Phone mode (Calling mode):
*9 *10
 VOICE MUTE
SPK SWITCH
*12 *13
 END CALL
CALL SOUND
*1 You can individually emphasize or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linkage. Refer to "Setting the Source Volume Level" on
page 15.
*2 PLAY MODE can be selected in this mode. For details, refer
to "Playing MP3/WMA Data (PLAY MODE)" on page 19.
*3 Refer to "Setting the iPod Control" on page 28.
*4 The setting items are the same as iPod setting in SETUP
mode. For details, refer to "iPod/iPhone Setting" on page 19.
*5 AUX NAME can be selected in this mode. For details, refer to
"Setting the AUX NAME Mode" on page 18.
*6 FW VERSION can be selected in this mode. You can see the
current firmware version about BLUETOOTH by using this
setting.
*7 CALL SOUND, SENDER ID, PB UPDATE, PB ORDER,
AUTO ANS, SEV NAME, SPEAKER SL and FW VERSION
can be selected in this mode. For details about these settings,
refer to "BLUETOOTH SETUP" on page 21.
*8 The Hands free phone talk level, ring tone level and
microphone gain level can be adjusted by using this setting.
The setting values in Option mode and in SETUP mode are
linkage. Refer to "Setting the Source Volume Level" on
page 15.
*9 While calling, the call sound can be switched between the
unit and mobile phone by using this setting.
This operation can also be done by pressing BAND. Refer to
"Call Switching Operation" on page 26.
*10 While calling, and the Voice Mute is activated, the
microphone input will mute instantly and "VOICE MUTE"
will blink. This operation can also be done by pressing .
Refer to "Muting the microphone input quickly (Voice Mute)"
on page 26.
*11 If there is a waiting call, select this item to display the caller's
Name and waiting number (1 or 2). Press VIEW and the
display will switch.
*12 Refer to "Setting the BLUETOOTH sound quality" on
page 22.
*13 Select this item to hang up the call.
*11
 CALL WAIT 
*8
 VOL LV ADJ
17
-EN