Using The Front Aux Input Terminal; Setup; Playing Mp3/Wma/Aac Data (Play Mode) - Alpine CDE-121E Owner's Manual

About "Text"
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
"text."
• Some characters may not be displayed correctly with this device,
depending on the character type.
• "NO SUPPORT" is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.

Using the Front AUX Input Terminal

Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
Press SOURCE/, and select the AUX mode to listen to
the portable device.
TUNER DISC USB AUDIO/iPod
1
* Displayed only when the iPod/iPhone is connected.
Portable player, etc.
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs)
12
-EN
1
AUX TUNER
*
Main unit
or

SETUP

You can flexibly customize the unit to suit your own preferences and
usage.
SOURCE/
Rotary encoder
j/r/ENT
/MUTE
/ESC
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
1
Press SETUP to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press the Rotary encoder
or j/r/ENT.
(e.g. Select PLAY MODE)
PLAY MODE AUX NAME
SUBW SYS PLAY MODE
3
Turn the Rotary encoder to change the setting.
(e.g. Select CD-DA or CDDA/MP3).
4
Press SETUP to return to normal mode.
• Press and hold /ESC for at least 2 seconds can also return to
normal mode.
• Press /MUTE to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

Playing MP3/WMA/AAC Data (PLAY MODE)

CD-DA (Initial setting) / CDDA/MP3
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
Only the CD data in Session 1 can be played back.
CD-DA:
CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
SETUP
DEMO