Specifications; Packing List - Ryobi RLT36 Operator's Manual

SPECIFICaTIONS

Model RLT36
Voltage 36 Volts
No Load Speed 9,000 - 10,000 rpm
Cutting head Automatic feed
Cutting Line
1.5 mm
Diameter
Cutting Path
280 - 330 mm
Diameter
Measured sound
LPA: 75.8 dB(A), KPA: 2 dB(A)
pressure level
Measured sound
LwA: 94.6 dB(A), KwA: 2 dB(A)
power level
Vibration ah = 1.70 m/s², K = 1.5 m/s²
Battery pack 1 x BPL3626
Charger 1 x BCL3620
4.1 kg
Weight
(with battery)
aSSEMBLY
UNPaCkING
This product requires assembly.
■ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
■ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.

PaCkING LIST

Line trimmer
Front handle
English (Original Instructions)
RLT36B
2.73 kg
(without battery)
WaRNING
Grass deflector
Plant protector
Battery (RLT36 only)
Charger (RLT36 only)
Operator's manual
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from
the product when assembling parts.
DESCRIPTION
1. Variable speed trigger
2. Rear handle
3. Lock-out trigger
4. Front handle
5. Upper shaft
6. Shaft coupling
7. Curved shaft
8. Plant protector
9. Grass deflector
10. Cutting diameter slide
11. Cutting line
12. Bolts
13. Bracket
14. Line cut-off blade
15. Cutting head
16. Motor housing
17. Screws
18. Screw holes
19. Battery pack
20. Battery latch button
21. Line release button
22. Spool cover
23. Spool cover lock buttons
24. Spool
5
WaRNING
WaRNING
WaRNING