How To Use This Manual - Datalogic Lynx Instruction Manual

HOW TO USE THIS MANUAL

To make system connections see par. 1.3.
You can configure the LYNX™ reader in the following ways:
reading the programming barcode symbols in this manual
configuration commands and their relative arguments are read individually
using the symbols in this manual. See chapter 2, Appendix B and
Appendix C.
using the Lynx™ Configuration Tools software utility
programming the reader is accomplished by selecting configuration
commands or printing them through a user-friendly graphical interface
running on the PC. These commands are sent to the reader over the current
communication interface; or they can be printed to be read. Install the
Datalogic VisualSetup program from the CD-ROM provided.
•
For information on how to use the device read chapter 1.
•
Explanations for some of the more complex barcode reading parameters
are given next to the relative parameter in chapter 2.
viii
CONNECTIONS
CONFIGURATION
DESCRIPTIONS