6.12.2 Overburn
On the above figure press ESC and
you decide whether to copy beyond the limit of the CD or not.
Press ENT to enter the following figure. The default is Off. Press
6.12.3 Read Error Skip
On the above figure press ESC and
is to neglect any error that occurs during copying. Under normal circumstances,
when an error occurs during copying, a message will appear on LCD. Yet, you can
use Read Error Skip to copy some defective DVDs.
Press ENT to enter the following figure. The default is Off. Press
M
to enter the following figure. Overburn lets
12-02. Adv Setup
Overburn
Overburn
Off
M
to enter the following figure.Read Error Skip
12-03. Adv Setup
Read Error Skip
Read Error Skip
Off
63
ARS-2021D/2021DS Manual
M
to select On.
M
to select On.