Table of Contents
Advertisement
ARS-2021D/2021DS Manual
6.11.9 Eject Disc
On the above figure press ESC and
provides three choices. They are Eject Good Only, Eject All Disc, and Do Not Eject.
Eject Good Only means that the DVD will eject automatically only when it is copied
successfully. Eject All Disc means that the DVD will eject automatically whether it
is copied successfully or not. Do Not Eject means that you need to eject the DVD
manually when copying finishes.
Press ENT to enter the following figure. The default is Eject Good Only. Press
select Eject All Disc or Do Not Eject.
6.11.10 Burn On The Fly
On the above figure press ESC and
Fly lets you control the copying methods. When the setting is On, the data will be
copied directly from the source DVD to the target DVD. When the setting is Off, the
data will be loaded into a partition of HDD first, and hence copying will be done.
M
to enter the following figure. Eject Disc
11-09. Setup
Eject
Disc
Eject
Disc
Eject Good Only
M
to enter the following figure. Burn On The
11-10. Setup
Burn On The Fly
56
M
to
Advertisement
Table of Contents
