After the image file is successfully loaded, LCD will show the results as follows.
If there is an image file existing in the current partition, the system will ask you
whether to overwrite it or not. Please use
6.9.2 Delete Image
If you want to empty an image file stored in a particular partition, you can use the
function Delete Image to do so. First, select the function by pressing
The system will ask if you are sure to delete. Use
Image load OK
L M
to confirm Yes or No.
Image Exists
Overwrite?Yes
9-02. Image P: A
Delete Image
Delete Image in
Partition A?Yes
35
ARS-2021D/2021DS Manual
M
.
L M
to confirm Yes or No.