When copying is in progress, MB and time will decrease whereas the percentage of
completion increase.
When copying comes to an end, LCD will show the results as follows. The passed
DVD will eject automatically.
6.2 Test
Function 2 Test is to simulate the copying progress. When simulation finishes, there
will be no data really written into the DVD disk.
Select function 2. Put a source DVD onto DVD-ROM and a blank DVD disk onto
the DVD writer.
Press ENT to start simulation. If you use a DVD rewriteable disk that contains data,
the old data will be quickly erased before simulation as shown below.
1.Copy
OK: 01
2.Test
Erasing disc
27
ARS-2021D/2021DS Manual