Clearing The Caller List - Panasonic KX-TCD715EM Operating Instructions Manual

KX-TCD715EM-3Basic1
Using the Caller List

Clearing the Caller List

You can clear some or all entries in the Caller List.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
To clear a specific entry from
the Caller List
1
Press or
information you want to clear is
displayed, then press
2
Press or
to "Clear".
S a v e P h o n e b o o k
E d i t F o r C a l l
H
C l e a r
3
Press .
• "Clear ?" is displayed.
4
Press or
press .
• A beep sounds and "CLEARED" is
displayed.
• After a few seconds, the display will show
the next caller information. To return to the
standby mode, press
30
01.7.19 2:13 PM Page 30
until the caller
.
until the arrow points
to select "YES", then
.
To clear all entries in the Caller
List
1
Press or until the caller
information you want to clear is
displayed, then press
2
Press or until the arrow points
to "All Clear".
H
A l l C l e a r
3
Press .
• "All Clear ?" is displayed.
4
Press or to select "YES", then
press .
• A beep sounds and "CLEARED" is
displayed.
• After a few seconds, the display will show
"No Stored Memory" and the
handset will return to the standby mode.
.