Table of Contents
Advertisement
9.3 Electronic control systems
9.3.1
Main PCB (MWM-EWM2000)
a. Remove the top.
b. Remove the screws which secure the support to the
board casing (23-24)
c. Detach the wiring from the supports
d. Extract the casing-PCB assembly
e. Detach the connectors
9.3.2
Control/display board
The way in which these boards are fastened depends on the styling version and the type of electronic
control system (MWM user interface, EWM2000 or EWM1000 electronic board). To access the board:
a. Remove the control panel
b. Release the PCB casing from the control panel or remove the screws.
For further details, refer to the specific Service Manuals for the various types of electronic control systems.
9.3.3
Control panel – "input" version
25
a. Remove the top (18)
b. Remove the detergent drawer
c. Remove the screws (19)
d. Detach the wiring connectors from the PCB (20)
e. Use a screwdriver to release the tab which anchors the the control
panel to the support (21) and remove the control panel from the
appliance.
9.3.4
Electronic pressure switch
a. Remove the top
b. Press down the anchor tabs and release the pressure switch from
the support.
c. Detach the connector
d. Detach the tube.
SOI/DT 2002-05 eb
23
26
100
24
27
28
29
599 35 23-17
Advertisement
Table of Contents
