Unbalanced Inputs - Violectric HPA V181 User Manual

BALANCED SIGNAL INPUTS
The balanced signal inputs are situated on the rear panel of the unit and
are labelled as "BAL IN LEFT" and "BAL IN RIGHT". They are fitted with
XLR sockets.
Please note:
Unbalanced signals can be injected as well by means of an adaptor.
Also see page 9.
Balanced XLR pinout:
PIN 1
PIN 2
PIN 3

UNBALANCED INPUTS

For the use with unbalanced signals, cinch sockets are provided. They
are labelled as "IN/OUT LEFT" and "IN/OUT RIGHT", and can be
configured as either inputs or outputs.
(about their configuration, see page 28)
GND
(+) PHASE
(-) PHASE
12