Dvr Layout; Front Panel & Removable Remote - Swann DVR4-950 Operating Instructions Manual

DVR Layout

Front Panel & Removable Remote
1. Hard Drive Indicator
Lights when hard drive is ac-
tive (fl ashes when recording,
searching etc.)
2. Power Indicator
Lights on when DVR powered
3. Channel 1 Button
Press to view camera 1 in full
screen / Press again to return to
quad view
4. Channel 2 Button
Press to view camera 2 in full
screen / Press again to return to
quad view
5. Menu Button
Press to select Menu / previous
menu / exit menu
Note: some menu functions
require a password. Default
password is "111111"
Using the Remote Control for the First Time
Remove
plastic tab on
this end of
remote.
The remote control contains a battery that must be activated before use.
Find and remove the clear plastic tab at the bottom of the remote. The
remote will now be ready for use.
5 5
1 2
9
6. Set Button
Press to confi rm selection
7. Record/Stop Button
Push to begin or stop recording
Note: will not work if time
or motion record is set.
8. Play/Pause Button
Push to open EVENT LIST,
begin last recording or pause
playback
9. Remote Control Sensor
10. Channel 3 Button
Press to view camera 3 in full
screen / Press again to return to
quad view
11. Channel 4 Button
Press to view camera 4 in full
screen / Press again to return to
quad view
3 4 5 6 7
10 11 12 13 14 15
12. Up Arrow
Move cursor up in menus
13. Down Arrow
Move cursor down in menus
14. Rewind Button
Push to rewind playback /
Move cursor left in menus
15. Fast Forward Button
Push to fast forward playback
/ Move cursor right in menus /
Activate AUTO SWITCH func-
tion
Note: 3-15 removable front
panel remote
8
IR LED