Dvr Layout - Swann D02C5 Operating Instructions Manual

DVR Layout

Front Panel
1. Power Indicator - Lights on
when DVR powered
2. Infra red sensor
3. Hard drive indicator - Lights
when hard drive is active (flashes
when recording, searching etc.)
4. Menu/ESC - Used to enter the
main menu or exit a sub menu.
5. PTZ - Press in live view to see
Pan, Tilt, Zoom pop up menu.
6. Next Channel - Press to go to
next channel in live view or playback
7. Previous Channel - Press to go
to previous channel in live view or
playback
Back Panel
1
2
1.Channel 1,2,3 & 4
2. Video Output
3. Audio Input
4.Audio Output
1 2 3 4 5
9 10 11 12 13
8. Quad Mode - Press to view all
channels in quad mode.
9. Rewind - Press to rewind a
recording / press to move cursor left.
10. Pause - Press to pause a record-
ing. During single display mode
press to activate sequence mode.
(AUTOSEQ must be set).
11. Play - Press to begin playing
most recent recording.
12. Fast forward - Press to fast
forward a recording / press to move
cursor right.
13. Stop - Press to stop a recording.
7
3 4 5 6
5. USB Mouse port
6. USB port
7. LAN port
8. Alarm connections
6 7 8
14 15 16 17 18 19
14. Record - Press to begin record-
ing.
Note: will not function if the cameras
are not activated in CAMERA SETUP
AND RECORD SETUP.
15. Up arrow - Move cursor up in
menus.
16. Left arrow - Move cursor left
in menus.
17. Down - Press to move cursor
down.
18. Right arrow - Press to move
cursor right in menus.
19. Select - Press to select an op-
tion/enter a sub menu.
8
9
9. VGA connection
10. Power Connection
5